How comfortable you feel programming in C++?
Field Applications Engineer Interview Questions
304 field applications engineer interview questions shared by candidates
What was the most expensive thing you ever broke on the job?
Networking and troubleshooting related to check your logic ability to identify the problem. They wouldn't expect industry specific knowledge about cameras, unless you've been to that industry or have played yourself.
Do you have experience programming a PPC or Risc processor ?
What is you experience and describe the project you done?
Caching during contacts loading
Questions about 802.11 ac scalability and deployment. when would it be recommended to shift from 2.4 to 5 GHz 802.11 standards like n and ac. What are requirements other than the APs. Client side requirements like Client radios, existing Ethernet network.
There were numerous interviews with lots of technical questions but one question that stood out was the classic "tell us of a time where you did NOT do something right" and I told a story where I snapped at a customer.
A circuit was drawn on the whiteboard consisting of two op-amps with reference voltages and and input voltage going into both op-amps. The outputs of the mosfet each had diodes, which were both attached to the gate of an n-channel mosfet, which had the source attached to ground, and the drain attached to a resistor which was connected to a reference voltage. I was then asked if I knew what the circuit did.
What is the point of these diodes/ analog components
Viewing 1 - 10 interview questions
See Interview Questions for Similar Jobs
Application Systems EngineerField Applications ScientistField EngineerApplication EngineerElectrical EngineerApplications Development EngineerSales EngineerPrincipal Design EngineerTechnical Marketing EngineerStaff Firmware EngineerField Service EngineerApplications ManagerField Applications Specialist